Pack of 5 black aluminum blades, 18 mm, RAL 9005 ft

Description

Keep it simple by ordering this aluminum slat kit. It contains all the essential components for creating your privacy screen, windbreak, louver, or bioclimatic trellis, and can be installed on either a wood or aluminum frame. One kit covers an area of 1 m² and is compatible with manual operation featuring a stopper.

📦 Pack contents:

– 5 black aluminum slats, 18 x 99 x 2000 mm
– 1 black SAM kit, 485 mm, for 18 mm slats
– 8 steel screws, with screw heads matching the color of the mechanism
– 2 black locking latches
– 10 meters of soundproofing seal

🛠️ Assembly instructions:

It is recommended to drill pilot holes in metal structures before installing the kits to prevent the screws from breaking.

Allow for 2 mm of expansion clearance at each end of the plank (4 mm total) before inserting it into the supports. Caution: Do not leave more than 4 mm of clearance between the supports, as the plank could fall out.

If you do not want the slats to be cut to size, leave a space of 2034 mm between the beams—that is, 2000 mm for the length of the slat, 30 mm for the thickness of the kit (15 mm on each side), and 4 mm for operational clearance (2 mm on each side).

Tip if you need to cut the planks: To determine their length, measure the distance between your joists and subtract 34 mm (15 mm for the thickness of the kit and 2 mm of expansion clearance for the plank on each side). Example: distance between joists = 1,500 mm, so the length of your planks = 1,500 – 34 = 1,466 mm

⛈️ Weather protection:

The aluminum slats interlock when closed. However, they do not form a watertight seal, and water may seep through depending on weather conditions and the installation configuration.

Caution: Be sure to open the slats in case of strong winds or snow.

🚚 Delivery time: 10 business days

🇫🇷 Made in France